Here's my future project. I'm planning to convert my GN over to an Aerocoupe using a Monte Carlo SS Aerocoupe rear window.

   

Below are some older pictures of the car taken in...maybe...2007.

 

 

 

Block: Stock 3.8L

Pistons: Stock

Crank: Stock  

Rods: Stock 

Harmonic Balancer: Stock

Flywheel: Stock.

Heads: Stock

Rocker Arms: Stock

Intake: Stock

Throttle body: Stock

Cam: Stock 

Intercooler: Kenne Belle “Boy Boy” Front mount intercooler

Turbo: Stock

Air Filter & Inlet Pipe: 14” K&N with 4” outlet, 3” pipe leading into 3" inlet turbo housing

Exhaust: Stock Headers with Hooker 2.5” duals

Fuel Control: Stock ECM. Stock fuel injectors. Walbro Single in-tank pump with "Hot Wire" kit.

Transmission: Stock 200-4R

Rear Axle: Stock 8.5" housing with stock 3.42 ratio gears. Stock upper and lower control arms with a lower control arm relocating kit. Pinion Snubber.

Tires & Wheels: Front: Weld Draglite 15x7 with P-215-65-15 Rear: Weld Draglite 15x8 rear wheels with P-255-70-15

Misc.: 195* T-stat, Front anti-sway bar removed, Stock Drive Shaft